Homebrew Manpack for my IC-705 and accesoires
If you have some time on the weekend to work portable. then you don’t want to spend a lot of time setting up and connecting my equipment. especially if this is the same setup...
If you have some time on the weekend to work portable. then you don’t want to spend a lot of time setting up and connecting my equipment. especially if this is the same setup...
Some time ago, Hans PE1ICE developed a compact ATV Receiver that could demodulate FM audio and Nicam audio also. Link to project: https://nvra.net/index.php/nicam-decoder/pe1ice-nvra-mini-atv-ontvanger/ All that was needed was to install the receiver in a...
Reception at 10Ghz can be quite a challenge, especially if you can receive the station to be received on the edge. I really had the problem that the signal went up and down even...
A friend of mine Gertjan PA3FZB who is crazy about 3.5m broadcast “amateur” stations 😉 recently came up with an article about a HB9CV design for 3.5m. He asked me if I could build...
First attempt to build a 23cm Yagi I had been looking for an antenna for 23 and 13cm for a while now. As I wanted to listen to SSB and Amateur Television stations. Now...
Simple conversion description MX62M with BNC Connectors UPDATE! 02-07-2023 I have replaced the BNC Pigtail cable with a fixed BNC Panelmount version instead to be more flexible. Recently I was looking for an...
Update! 30-12-2022 It’s been a while since I gave an update on the Magnetic Loop controller project I’m working on with Rob PA5RH. The purpose of the Loop Tuner was that it can tune...
Some time has passed, and a lot has been done so far. Construction Tuning Section First I had to find a way to mount the vacuum condenser on the mounting plate. Because I print...
Recently my colleague, Rob PA5RH and I came up with the idea to build an automatic loop tuner. Rob is busy with the software part where I have already started on the mechanical part....
As I have succesfully built the ATU-100 kit, I decided to go for a beafier ATU kit. Some weeks ago I received a kit from Ali Express. The ATU-1000 Automatic Antenna tuner kit. It...
Recently I purchased a ATU-100 Antenna tuner kit from Aliexpress. I have purchased this kit because the internal tuner of my IC-7610 has a tuning limit of 150ohms / SWR <3:1 as most internal...
How to get the CC41-A to work with your applications. I have bought several of these fake HM-10 modules, called CC41-A Left one is the original HM-10 module, in the middle is the fake...
To be able to calibrate the Analyzer properly (OSL), we need accurate loads. It is also important that the loads over the entire spectrum also function well, show no reflections or have other characteristics...
I have always wanted A good analyzer for HF up to VHF (2m) In the past I have build many Antenna Analyzers started with: Antan Analyzer VK5JST Antenna Analyzer Toghether with Jarek SP2SWJ we...
Last week I have constructed a new antenna system for HF operations. 3 Years ago, I started with a 2 band FAN Dipole. for 10m and 20m. I have enjoyed operating with this antenna...