I’ve always been interested in all kinds of loop antennas. This is because closed systems are generally less sensitive to QRM and therefore receive more quietly. What I’ve been wanting to try for a while is to make a Deltaloop for 40m. And fed in such a way that it …
pd5dj 
ATV Receiver project
Some time ago, Hans PE1ICE developed a compact ATV Receiver that could demodulate FM audio and Nicam audio also. Link to project: https://nvra.net/index.php/nicam-decoder/pe1ice-nvra-mini-atv-ontvanger/ All that was needed was to install the receiver in a housing. In the first housing I had based on a supply voltage of 12v. I also …
Getting better 10GHz reception, modifying the mast :-)
Reception at 10Ghz can be quite a challenge, especially if you can receive the station to be received on the edge. I really had the problem that the signal went up and down even with a little bit of wind. The problem was that the mast on which the dish …
HB9CV 3.5m Project
A friend of mine Gertjan PA3FZB who is crazy about 3.5m broadcast “amateur” stations 😉 recently came up with an article about a HB9CV design for 3.5m. He asked me if I could build it for him. and so it happened 🙂 On the internet there is a very handy …
23cm Yagi Antenna building
First attempt to build a 23cm Yagi I had been looking for an antenna for 23 and 13cm for a while now. As I wanted to listen to SSB and Amateur Television stations. Now I had found some factory antennas online. Only the price.. hmmm.. For these prices I can …
Diamond MX62M Diplexer Modification for IC-705
Simple conversion description MX62M with BNC Connectors UPDATE! 02-07-2023 I have replaced the BNC Pigtail cable with a fixed BNC Panelmount version instead to be more flexible. Recently I was looking for an easy way to build a Diplexer for my Icom IC-705. My eye fell on the Diamond …
Magnetic Loop Controller update
Update! 30-12-2022 It’s been a while since I gave an update on the Magnetic Loop controller project I’m working on with Rob PA5RH. The purpose of the Loop Tuner was that it can tune automatically, and uses the internal SWR meter of the connected radio, and reads this via CAT. …
Magnetic loop construction – PART 2
Some time has passed, and a lot has been done so far. Construction Tuning Section First I had to find a way to mount the vacuum condenser on the mounting plate. Because I print a lot in 3D, I had the choice to design and print mounting brackets. Also important …
Start of build Automatic Magnetic Loop controller – PART 1
Recently my colleague, Rob PA5RH and I came up with the idea to build an automatic loop tuner. Rob is busy with the software part where I have already started on the mechanical part. As loop, Cellflex 1 1/4 inch Coax cable is used. This has a (copper) outer diameter …
ATU-1000, 1KW Automatic Antenna tuner
As I have succesfully built the ATU-100 kit, I decided to go for a beafier ATU kit. Some weeks ago I received a kit from Ali Express. The ATU-1000 Automatic Antenna tuner kit. It is based on the same design of N7DCC, but the board is designed by EU2AV. The …